PCB 1.0mm Pitch Pin Header Connectors Through Hole Waterproof
- Shenzhen Soulin Electronics Technology Co., Ltd. is a high-tech enterprise which specializes in the tmanufacturing and marketing of pin header,female header ,sata cable ,avation connector , SATA connectors, USD3.0 ,HDMI , cable. Since the establishment of the company, we have been and remain committed to becoming the industry leader for connectors .
- Pin Header, a type of connector.
- This connector is widely used in electronic, electrical, instrument in the PCB circuit board, its role is in the circuit is blocked or isolated between the circuit, play a bridge function, take up the task of current or signal transmission.It is usually used with the busbar to form a board-to-board connection.Or matching with the electronic wiring harness terminal, forming a board-to-wire connection;Can also be used independently for board to board connection.
- Because the specifications required by different products are not the same, there are also a variety of pin specifications, according to the standard classification of pin connectors in the electronics industry:
- According to the spacing can be roughly divided into 2.54mm, 2.00mm, 1.27mm, 1.00mm, 0.8mm five categories according to the number of rows have a single row of needles, double row of needles, three rows of needles;According to the packaging rules with SMT(horizontal paste/vertical paste), plug-in DIP(direct insert/bend insert);According to the installation mode, 180° is represented by S, 90° by W, and SMT by T.
- Number of rows: single row, double row, three row, four row at most.
- Pin number: 02 to80
- Stitching: straight foot, bent foot, SMT;The size of the needle.
- Dimensions: overall dimensions length, width, thickness, row spacing.
- Spacing: 0.8, 1.0, 1.27, 2.0, 2.54.
- Material: refers to contact material and surface treatment, insulation material.
- Packing: blister shell, roll bag, bulk.
- Material: Pin material: brass or phosphor bronze;Insulation material: plastic UL94V-0.
- Surface treatment: gold plated 0.8U, tin plating, nickel plating.
- Processing technology: Row needle processing process is mainly: according to the requirements of brass (or phosphor bronze) processing pin,
- And according to the requirements of nickel plating and then gold, and then use a mold to process the insulation part, and finally in special equipment according to the ruler
- The pin is required to be inserted into the insulator.
